Suspension Go kart Plate Kit

If you're looking for a DIY go-kart plate kit, these kits are a great foundation for building your own custom go-kart. Can be used for go-karts, wheel barrow karts, cooler karts, cycle karts, or any other creative kart you can imagine. Most people have access to some sort of affordable metal tube, pipe, flat bar, or angle from local classified adds. But the plates needed to build a go kart frame are not as easily found or fabricated without special equipment. The first two pictures above are what comes with the basic kit, all other pictures are optional parts. This kit includes these parts:
 
Motor mount plate (your choice of bolt pattern= universal ((only 2 slotted holes)), up to 9.5 HP, or over 10 HP) YOU MUST ADD YOUR  BOLT PATTERN PREFERENCE IN THE NOTES WHEN ORDERING OR YOU WILL RECIEVE THE UNIVERSAL MOUNT BY DEFAULT
Standard spindle mounts
Spindle mount stifners
Front cable mounts
Rear band brake mounting rod
Rear brake cable mount
Front steering shaft mount slotted plate
Rear steering shaft mount slotted plate
5/8" I.D. round steering shaft mount tubes
1" live axle bearing hangers
Pivot point mounts for 2 a-arms & a swing arm
 
Optional parts and part upgrades:
Manual disc brake caliper mount (intended for use with the cheap calipers that use the c-shaped caliper mounting bracket)
Hydraulic disc brake and master cylinder mounts (intended for use with MCP hydraulic brake kit for 1" axles)
Amazon style spindle mounts with stifners (intended for the spindle kits on Amazon that have the included front disc brakes like on our bolt/weld together cooler kart frame kits)
Spring spindle mounts with stifners (these are designed to be used with special springs for a cheap way to get a little bit of suspension, springs not included)
Adjustable caster plates (will give an approximate adjustment range in caster from -20 to +20 degree)
Adjustable camber plates (will give an approximate adjustament range in camber from -5 to +5 degree in 1 degree increments)
3x3 gusset/mount (can be used as a gusset in 90 degree joints, and also as a mounting point for lights, whips, flags, etc. Has 1x1/2" hole centered, 2x3/8" holes, and 2x1/4" holes)
Ball hitch mount (designed for use with hitch balls with a 1" stud)
Adjustable jack shaft mounts (designed to be used with 5/8" or 3/4" shafts)
 
CAN BE SHIPPED TO ANY COUNTRY THAT USPS FLAT RATE BOXES CAN BE SHIPPED TO. (CONTACT US FOR PRICING).
 
If there is something you would like to have included with your kit, including special custom plates let us know. We have the capabilty to design and make custom parts.