Custom frame work

We have the ability to fabricate custom frames for various off road toys and vehicles. Our custom work is on an as time permits basis, and is on a first come first serve basis. If you have any questions concerning a project you would like to have done feel free to contact us. Here are a few of our previous projects, more to come.

1966 Corvette

Customer provided finished body for fitment purposes. We designed and built a custom frame to accommodate a 72V 3000watt powertrain. Top speed is around 38MPH. We 3D printed the steering wheel, hub caps, exaust, and switch panel. Seat with custom brackets, and side panels were upholstered by Hot Rod upholstery. Frame was coated by Biltwood Powder Coating. 3D printed parts were chrome coated by Nuprint Customs.

Jr. Divco Truck

Customer wanted a non-original frame built for a custom interior and a larger gas engine (212 Predator).

Ferrari

This was an existing Ferrari project that wasn't completed by the previous owner. It has a one of a kind hand formed aluminum body. We upgraded the non-functional powertrain, touched up the frame paint, improved body mounts to make removal quicker & easier, and 3D printed the hub caps. Top speed is around 18MPH. Customer is going to have interior reupholstered at a later time. Steering wheel in pictures are not part of this car, it's for test purposes only.

1968 Thunderbird Jr. restoration & replica

We cleaned, repaired, and refinished the original Powercar. We were able to reuse most of the original parts. Top speed of original car is about 5MPH.

Using the original car we were able to replicate the frame closely. These frames are available on our 'Buy A Go Kart Frame' page. We used parts that were as close to the originals as we could find. Top speed of the 48V 1800watt powertrain is about 18MPH.