Custom frame work

We have the ability to fabricate custom frames for various off road toys and vehicles. Our custom work is on an as time permits basis, and is on a first come first serve basis. If you have any questions concerning a project you would like to have done feel free to contact us. Here are a few of our previous projects, more to come.

 

1966 Corvette

Customer provided finished body for fitment purposes. We designed and built a custom frame to accommodate a 72V 3000watt powertrain. Top speed is around 38MPH. We 3D printed the steering wheel, hub caps, exaust, and switch panel. Seat with custom brackets, and side panels were upholstered by Hot Rod upholstery. Frame was coated by Biltwood Powder Coating. 3D printed parts were chrome coated by Nuprint Customs.

IMG_5601.JPG

IMG_5601.JPG

IMG_5595.JPG

IMG_5595.JPG

IMG_5696.JPG

IMG_5696.JPG

IMG_5668.JPG

IMG_5668.JPG

IMG_5605.JPG

IMG_5605.JPG

IMG_5613.JPG

IMG_5613.JPG

IMG_5608.JPG

IMG_5608.JPG

IMG_5586.JPG

IMG_5586.JPG

IMG_5583.JPG

IMG_5583.JPG

IMG_5587.JPG

IMG_5587.JPG

IMG_5585.JPG

IMG_5585.JPG

IMG_5588.JPG

IMG_5588.JPG

IMG_5584.JPG

IMG_5584.JPG

 

Jr. Divco Truck

Customer wanted a non-original frame built for a custom interior and a larger gas engine (212 Predator).

IMG_1277.jpeg

IMG_1277.jpeg

IMG_1259.jpeg

IMG_1259.jpeg

IMG_1263.jpeg

IMG_1263.jpeg

IMG_1587.jpeg

IMG_1587.jpeg

IMG_1585.jpeg

IMG_1585.jpeg

IMG_1594.jpeg

IMG_1594.jpeg

IMG_1598.jpeg

IMG_1598.jpeg

IMG_1601.jpeg

IMG_1601.jpeg

IMG_1646.jpeg

IMG_1646.jpeg

IMG_1684.png

IMG_1684.png

 

Ferrari

This was an existing Ferrari project that wasn't completed by the previous owner. It has a one of a kind hand formed aluminum body. We upgraded the non-functional powertrain, touched up the frame paint, improved body mounts to make removal quicker & easier, and 3D printed the hub caps. Top speed is around 18MPH. Customer is going to have interior reupholstered at a later time. Steering wheel in pictures are not part of this car, it's for test purposes only.

IMG_5678.JPG

IMG_5678.JPG

IMG_5669.JPG

IMG_5669.JPG

IMG_5631.JPG

IMG_5631.JPG

IMG_5639.JPG

IMG_5639.JPG

IMG_5645.JPG

IMG_5645.JPG

IMG_5646.JPG

IMG_5646.JPG

IMG_5711.JPG

IMG_5711.JPG

IMG_5709.JPG

IMG_5709.JPG

IMG_5706.JPG

IMG_5706.JPG

IMG_5713.JPG

IMG_5713.JPG

IMG_5722.JPG

IMG_5722.JPG

 

1968 Thunderbird Jr. restoration & replica

We cleaned, repaired, and refinished the original Powercar. We were able to reuse most of the original parts. Top speed of original car is about 5MPH.


Using the original car we were able to replicate the frame closely. These frames are available on our 'Buy A Go Kart Frame' page. We used parts that were as close to the originals as we could find. Top speed of the 48V 1800watt powertrain is about 18MPH.

IMG_3947.JPG

IMG_3947.JPG

IMG_3948.JPG

IMG_3948.JPG

IMG_2278.JPG

IMG_2278.JPG

IMG_4013.JPG

IMG_4013.JPG

IMG_4016.JPG

IMG_4016.JPG

IMG_4022.JPG

IMG_4022.JPG

IMG_4009.JPG

IMG_4009.JPG

IMG_4007.JPG

IMG_4007.JPG

IMG_4005.JPG

IMG_4005.JPG

IMG_4003.JPG

IMG_4003.JPG

IMG_3998.JPG

IMG_3998.JPG

IMG_3995.JPG

IMG_3995.JPG

IMG_3997.JPG

IMG_3997.JPG

IMG_3996.JPG

IMG_3996.JPG

IMG_3993.JPG

IMG_3993.JPG

IMG_3989.JPG

IMG_3989.JPG

IMG_3985.JPG

IMG_3985.JPG

IMG_3980.JPG

IMG_3980.JPG

IMG_3976.JPG

IMG_3976.JPG

IMG_3962.JPG

IMG_3962.JPG

IMG_3970.JPG

IMG_3970.JPG

IMG_3963.JPG

IMG_3963.JPG

 

Subscribe Form

  • Facebook

©2019 by Liberty Karts. Proudly created with Wix.com

IMG_1598.jpeg